Tools

How to Install Stock ROM on Android device using SP Flash Tool

Written by Aditya

You have stock firmware with you and want to install it on your device? but don’t know how to do it? well, read this article carefully because today we are going to share the step by step guide on How to install Stock ROM/Firmware on Android device using SP Flash Tool. 

SP Flash Tool is a Window software and it is used to flash Stock ROMs/firmware, but not every device can install the firmware on their device via SP Flash Tool. Only those devices can install the firmware which has an inbuilt Mediatek(MTK) processor.

Flashing any ROM with SP Flash Tool is very easy but the only condition is you must have a correct stock ROM for your device. 

Disclaimer

Androidleaker.com will not take any responsibility for any kind of problem to occur in your device at the time of unlocking bootloader. We are 100% sure that this article is well written without any errors. But, if you don’t follow it correctly then you will end up bricking your device. So, FOLLOW THIS GUIDE CAREFULLY!

Pre-Requisite to install the Stock Firmware using SP Flash Tool

  • This guide is strictly made for devices having in-built MTK processor.
  • A working PC or Laptop.
  • You need to install the latest USB Drivers of your device on your computer.
  • Make sure to charge your device upto 80% to avoid any issues.
  • You need a USB data cable to connect your device.

How Flash Stock ROM on any Device using SP Flash Tool:

Before jumping to this process make sure you have all the required things which are mentioned above to prevent any unwanted issue.

Step1) First of all you need to install MediaTek Vcom Drivers on your device. So go ahead and install it first.

Step2) Now download SP Flash Tool from the below link and extract the file in your PC.

Sp Flash Tool

Step3) Now open ‘Flash Tool’ by double click on it.

Step 4) Now, you need to extract the stock firmware which you have downloaded from above. Now in Sp Flash tool you will see Scatter-loading menu click on Browse button and select the MT6xxx_Android_scatter.txt(You will get it after extracting the ROM). Look at the below image for reference.

 

Step 5) After loading the MT6xxx_Android_scatter.txt file click on Download Button as shown in the below pic.

 

Step 6) Now get your phone and Hold the Volume Down and Volume Up key together, now with the help of USB cable connect your device to your computer.

Step 7) As soon as your phone gets detected, the flashing process will start.

Step8) Wait until the process is fully completed and once it is done. Disconnect your Umidigi Power from your Computer and enjoy the Stock ROM on your device.

So, that’s was the complete guide on How to Install Stock Firmware on any Android device.  If you have any queries or you are stuck at any part then you can drop your query in the comment section below or you can reach us by going to our Contact Us form.

 

About the author

Aditya

My Name is Aditya or you can call me Aadi, I am very passionate about Android and tech stuff that's why I started this blog to help others with their Android devices. Apart from writing and exploring the tech world, I love to watch anything on Netflix and currently Stranger Things is my favorite series. :)

Leave a Comment